Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL - 4" Lift - Qty 2

See what our Experts say about this Air Lift Accessories and Parts

• How Tall is the Air Bag Used in the AirLift Load Lifter 5000 System For 2005 Ford F-150
  The AirLift # AL57200 system uses the 58437 air bag, which is 6" tall. If you find that you need a spacer after installation, I've listed all of the available spacers below. - 2 Inch Lift: Air Lift Spring Spacers # AL52420 - 4 Inch Lift: Air Lift Spring Spacers # AL52440 - 6 Inch Lift: Air Lift Spring Spacers # AL52460
  view full answer...
• Can Air Lift and Timbrens be Installed on a 2004 Ford F-250
  From what I can see it looks like the Timbren Rear Suspension # TFR250SDE will fit with the Air Lift LoadLifter 5000 # AL88298 on your 2004 Ford F-250. The Air Lift brackets have an opening that will fit around the mounting hardware for the Timbrens. Depending on the lift of your vehicle you may need a spacer kit like the 2" Spacer # AL52420 or 4" Spacer # AL52440. To determine which spacer kit you need (if any), you need to park your truck on a level surface and measure the distance between...
  view full answer...
  
• Which AirLift Air Bags Are Needed for a 2021 GMC Sierra 1500 with a Lift Installed
  We've got just what you're looking for. You can use the AirLift LoadLifter 5000 Ultimate Air Helper Springs # AL88288 on your 2021 GMC Sierra 1500 4WD with a lift, but it's likely that you're going to need spacer blocks for the bags. To determine if you're going to need a spacer block you'll want to measure the distance between the mounting surfaces of the upper and lower brackets and then subtract the height of the air bags, which for the # AL88288 is 5-1/2". The available spacers for...
  view full answer...
  
• Will Air Lift LoadLifter 5000 AL88275 Fit 2008 Chevy Silverado 3500 W/ 6 Lift and B&W Turnoverball?
  Since the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BWGNRK1067-5W you purchased for your 2008 Chevrolet Silverado 3500HD SRW mounts to the sides of the frame and the Air Lift LoadLifter 5000 Air Helper Spring Kit # AL88275 mounts to the bottom of the frame you will have no issues with the installation or interference. Since you mentioned your truck is lifted 6" you will need to use a spacer to take up the gap between the bottom of the spring and the...
  view full answer...
• Help Fitting Air Lift Air Helper Springs On a 2019 Ram 1500 Classic With 6" Rough Country Lift Kit
  Currently Air Lift only offers the spacers which fit between the mounting brackets and the air spring like the 4" Spacer # AL52440 you will need for the 6" Rough Country Lift on your 2019 Ram 1500 Classic. Your lift only raises the rear suspension 4" as it lifts the front 6" to level your truck. I do see the brackets Rough country uses for the control arms will interfere with the mounting bracket for the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88365. To resolve this issue...
  view full answer...
• Recommended Air Helper Springs And On-Board Air Compressor For 2018 Ford F-150 W/ 6 Lift
  I have another option for you, but the Air Lift Ride Control # AL59570 will not fit your 2018 Ford F-150 since it has a 6" lift. Instead I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88268 if your truck is a 2WD, or the # AL88385 if your truck is a 4WD model. Since your truck has a 6" suspension lift you will either need the 6" Spacer # AL52460, or a 4" spacer # AL52440. A lot of times a 6" lift is not truly 6" so I highly recommend...
  view full answer...
• Recommendation For Reducing Rear End Sag On Lifted 2017 Ram 1500 When Towing a Travel Trailer
  The best way to help reduce sag when towing your travel trailer with your 2017 Ram 1500 Bighorn having a lift is with a weight distribution hitch. Personally I fee the Equal-i-zer hitch systems are the best option as they are made in the USA and have a reputation as being one of the best available. You do need to select the correct system based on the weight of your trailer. 200-600lbs Tongue Weight, Trailer Up to 6,000lbs # EQ37060ET 600-1,000lbs Tongue Weight, Trailer Up to 10,000lbs...
  view full answer...
• Air Lift Air Spring Kit For A 2021 F-250 FX4 With The Tremor Package
  Hi Oscar, I'm seeing conflicting information on the Tremor package, but from what I can see there should be about an inch lift compared to the standard models so you'll likely just need a spacer block. Air Lift recommends installing both the lower and upper mounting brackets, measuring the gap between them, and then subtracting the height of the air spring in order to find the correct sized spacer. Air Lift offers the following spacers: 2" Lift # AL52420 4" Lift # AL52440 4" Lift Angled...
  view full answer...
  
• Air Lift LoadLifter 7500 XL Air Helper Springs for 2016 Ford F-250 with 4 inch Lift
  As long as the 2016 Ford F-250 Super Duty has 4wd, you can use the Airlift air springs part # AL57596 with a 4 inch lift and a 5th wheel hitch in the bed. You need spacers to make up the room from the 4 inch lift in your suspension. Just because you have a 4 inch lift does not always mean you need a 4 inch spacer. You have to do a couple measurements to figure out which size spacer you need. You need to measure from the frame to the top of the axle on the Ford. Then subtract the operating...
  view full answer...
  
• How to Measure the Correct Lift Spacer Needed for Air Lift LoadLifter 5000 Springs
  Gene, in order to find out what lift spacer you're going to need for your 2019 Ford F-150 you're going to need to measure the distance between the upper and lower mounting bracket and subtract the height of the spring. That number is going to be the spacer needed if any for your F-150.
  view full answer...
• Will The Air Lift LoadLifter 5000 Ultimate Air Helper Springs Fit A 2022 Ford F-150 With 6" Lift
  The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL54JQ are a confirmed fit for your 2022 Ford F-150, but we won't be able to determine the spacer kit you'll need until the top and bottom brackets are installed. A 6" lift doesn't always equate to needing a 6" spacer so you'll need to measure the distance between the brackets and subtract the height of the air spring bellow. The bellow included in this kit is 6" tall. I've listed the available spacer...
  view full answer...
• Air Lift Air Bag System For a 2015 Ford F-150 With A 4 Lift Installed
  The Air Lift LoadLifter 5000 Air Helper Springs # AL57385 will fit all models of your 2015 Ford F-150. While this is a good kit I recommend using the Air Lift LoadLifter 5000 Ultimate Air Springs w/ Internal Bumpers # AL88385 as being the better option for a lifted truck. Typically lifted trucks like to go off road more and flex their suspension. These bags have internal jounce springs that will help absorb shock in the suspension. With either set you will need an air spring spacer...
  view full answer...
• Do I Need Spacers to Install a Air Bag Kit on a 2019 Chevy Silverado 2500 w/ a 5" lift?
  You will definitely need a couple of spacers to add the Air Lift LoadLifter 7500 XL Air Helper Springs item # AL57538. Most if not all 5" lifts on Chevy trucks are not 5" in the rear because of the rake Silverado's come with from the factory. You most likely need a 3" spacer like item # F2367. The easiest way to tell what size spacer you need is to measure your lifting block. Here are the options for 2" and 4" spacers if your lift is not 3" in the rear. 2" Spacer item # AL52420 4" Spacer...
  view full answer...
• Can You Install Air Lift LoadLifter 5000 Ultimate Air Springs On 2013 Ford F-150 With 6 Lift
  You can definitely install the Air Lift LoadLifter 5000 Ultimate Air Springs w/ Internal Bumpers # AL88200 on your 2013 Ford F-150 with a 6" lift with the addition of a spacer. The weird thing about 6" lifts is they rarely actually raise the suspension 6" and are usually closer to 4" so the best way to get the correct spacer the first time is to measure the distance you have left between the lower mounting bracket on the truck and the lower bracket on the air spring itself with the air...
  view full answer...
• Recommended Suspension Enhancement System for 2013 Toyota Tundra With 6-Inch Lift
  The Air lift LoadLifter 5000, part # AL88299 is designed to fit your Tundra if you do not have a fifth wheel or gooseneck hitch in the bed of your truck. If the truck has a suspension lift you need to measure the space where the airbags are going to sit to determine the size of spacer you need. For Air Lift we carry two, part # AL52440 for a 4 inch spacer and part # AL52420 for a 2 inch. To be able to control the amount of air you keep in your suspension system I recommend the Air Lift...
  view full answer...
• Air Lift 7500 XL Air Bag Parts Needed For a Lifted 2020 Ford F-250 Super Duty
  For installing the Air Lift LoadLifter 7500 XL Air Helper Springs # AL55FJ on your 2020 Ford F-250 4X4 that is lifted they do make spacers. The spacers are available in different heights that you will need to confirm which is correct for your 3.5" Carli backcountry suspension kit. 2" Air Lift Universal Air Spring Spacers # AL52420 4" Air Lift Universal Air Spring Spacers # AL52440 6" Air Lift Universal Air Spring Spacers # AL52460 On your 3.5" Carli backcountry suspension kit the 3.5"...
  view full answer...
• Recommended Rear Airbags on 2017 Ford F-250 Super Duty with 4 Inch Lift
  The Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle # AL57391 are a confirmed fit for your 2017 Ford F-250 truck. Due to the 4 inch lift, you will also want to add the Air Lift Lock-N-Lift Spacers for Lifted Vehicles - 4" Lift # AL52440. This combination will give you the air springs compatible with your lift and will give you the manual inflation option. If you want to add the ability to adjust your air springs at any time, I recommend adding the gauge and compressor. The Air...
  view full answer...
• Does Air Lift LoadLifter Air Bag Get Stretched with Spacers on 6 Lift
  When you have a 6" lift there are spacers available for air bag kits like the 2" # AL52420, 4" # AL52440, and 6" # AL52460 so that the air bags don't get stretched past their limit. You have to double check the actual raised height of your vehicle though because sometimes something labeled as a 6" lift doesn't truly lift the vehicle 6".
  view full answer...
• Spacer Kit Needed For An Air Lift Air Spring System On A 2001 Ford F-250 With A 4" Lift
  Separate spacers can be purchased to make the Air Lift LoadLifter 5000 Air Helper Springs # AL57390 compatible with your 4" lift. A 4" lift doesn't always equate to a 4" gap so you'll want to install the upper and lower brackets and then measure the space between them. You can then subtract the height of the bag to determine the spacer size needed. Air Lift offers a 2" # AL52420 and 4" # AL52440 spacer to help bridge the gap.
  view full answer...
• Recommended Air Lift Suspension Enhancement for 2015 Silverado 1500 with 4-1/2 Inch Lift
  For your 2015 Chevrolet Silverado 1500, I recommend the Air Lift LoadLifter 5000 Air Helper Springs # AL57204 if you do not have an 8 foot bed. For an 8 foot bed, you will instead use # AL57211. These will provide your Silverado with up to 5,000 pounds of load-leveling support and help to reduce strain on its rear suspension. You can manually adjust the air pressure in order to get an even load distribution. Each spring can be inflated independently for side-to-side leveling of off-center...
  view full answer...
• Recommendation for Adding Spacers to AirLift 1000 Air Helper Springs on a 2005 Jeep TJ
  I recommend adding Air Lift Lock-N-Lift # AL52440 spacer kit to the AirLift 1000 Air Helper Springs for Coil Springs # AL60811 as it lets you add air springs to your lifted vehicle. It will work with vehicles with up to a 4 inch lift. The diameter of the spring 5-3/8 inches and 4 1/2 inches tall. I added an instruction link for you as well.
  view full answer...
• Recommended Air Bags For A 2023 GMC Sierra 1500 With A Lift Kit Installed
  Yes, the Air Lift LoadLifter 5000 Ultimate Plus Air Springs w/ Internal Bumpers # AL89288, which are a confirmed fit for your 2023 GMC Sierra 1500 have multiple lift spacers available to ensure a correct fit. Simply choose the correct kit to match the lift you have: 2" Lift # AL52420 4" Lift # AL52440 6" Lift # AL52460 I do want to note that the # AL89288 does not fit vehicles equipped with Adaptive Ride Control or AT4 models. This kit comes with manual fill ports for your bags so...
  view full answer...
• Recommended Air Bag Suspension for a 2008 Ford F-250
  Those don't fit a 2008 Ford F-250. Instead you will need the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers item # AL88398. These work with the 4WD models and have the same 5,000 lbs capacity. If your F-250 is a 2WD you'll need item # AL88212. Since your F-250 has a 4-1/2" lift you will need to add a spacer to the rear end to compensate for the extra space in the suspension. There's two options and which one you need will depend on how tall the lift actually...
  view full answer...
• Do I Need an Angled Spacer for the Air Lift LoadLifter 5000 Helper Springs?
  You will need to get under your 1990 Chevrolet Suburban and look at the upper mounting bracket where the Air Lift LoadLifter 5000 Ultimate Air Helper Springs item # AL88221 attaches. If this bracket is angled, like the attached picture, you will need the Air Lift Angled Universal Air Spring Spacers item # AL49GV you referenced. If this bracket is flat then you will need the Air Lift Universal Air Spring Spacers item # AL52440.
  view full answer...
  

Do you have a question about this Accessories and Part?